Unlike other wands on the market, Lumin Wand delivers over 100 mJ/cm2 of UVC irradiance output in under 5 seconds, enough to kill up to 99.9% of tested microbes. Other devices are weakly powered and deliver less than 1% of the UVC output delivered by the Lumin Wand and would require several hours of contact time to reach the effectiveness of the Lumin Wand. The Lumin Wand is lab tested to remove over 99.9% of E. coli, Staph, Listeria, Salmonella, H1N1 and Human Coronavirus. Laboratory testing available upon request.
The Lumin Wand has been safety engineered to prevent unintentional injury. Three advanced safety features have been designed in. These include a 3 second delay on, to avoid a child from unintentionally activating the device. A proximity sensor will turn off the light source if the Wand is lifted higher than 6” from a surface. A third safety feature is the advanced sensor detection of any turn of the wrist, which shuts off if a user attempts to look directly at the light source.
The Lumin Wand requires the on/off button to be held down continuously for 3 seconds.
A proximity sensor will automatically turn off the light source if the Lumin Wand is lifted higher than 6” off a surface.
ADVANCED SENSOR TECHNOLOGY
The Lumin Wand has advanced sensor technology which is capable of detecting a user’s turn of the wrist. This safety feature will shut off the light source if a user attempts to turn the device away from a surface to protect the user.
The ability of a UV device to kill germs is dependant on two variables:
- Contact time
- Irradiance dose
Most wands on the market have a contact time of 2-5 minutes (if they work at all). In real world terms this would require a user holding a wand steady for 2 minutes, then moving ¼” over and holding steady for another 2 minute over and over again. In other words, not effective. Lumin Wand is lab tested to be effective in seconds. In terms of irradiance, or UVC power, The Lumin Wand delivers over 100 times the UVC output of most other wands.